FE400 Vico-3

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of…

Profilma 400V

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade…

Prisma 400

Manual end notching saw to work the ends of aluminium or PVC profiles Use of saw blades Ø 400 mm vertical and horizontal Manual operation with slidable supporting table 2 x 3,0 KW, 400 V, 50 Hz Pneumatic profile clamps horizontal and vertical Material back fence adjustable 30° – 90° read out by scale Vertical…

Procut 400

Precise 45° V-cuts and minimal waste when use as double mitre saw 2 saw blades, Ø 400 mm Profile size max. 95 mm width, 125 mm high 2 x 3 KW, 400 V, 50 Hz,  2850 R.p.m. High cutting speed: 60 m/s Hydro- pneumatic feed infinitely adjustable according to the profiles Material back fence  fixed…

Profilma 502

Fully automatic operation with graphic control elements. 7.5 kW drive, 400V, 50 Hz. For HM or PCD saw blades Ø550 mm, max. 2850 rpm. Servo-controlled saw feed, vertically from below. Material feed via servo-controlled ball screw drive. Control Siemens S7 with 7 “touch display. Cutting area 270 x 150 mm (W X H). Remaining piece…

SW600

Automatic cutting line for PVC and aluminum profiles with 90° and miter cuts Machine control unit through PC and 21“ monitor Maximum raw profile length to be processed with standard version of machine is 1000-7000 mm (longer lengths possible on demand) Shortest cut-off length (at 90°) is 90 mm, shorter pieces possible upon request Shortest…

Profilma 250

The high-performance automatic saw Profilma 250  is designed for cutting aluminum and non-ferrous metals to length with a particularly thin saw blade. Depending on the version, solid carbide circular saw blades Ø 250 mm with 1.6 mm width or Ø 200 mm with 1.2 mm width can be used on this machine. Compared to the…

TS 350

For sawing aluminum and plastic profiles. Use of Ø350 mm saw blades. Drive 1.5 KW, 400 V, 50 Hz. Manual handling, saw cut from bottom to top. Material cross lay swivel 45 ° -90 ° -45 ° with scale. Pneumatic profile clamping vertical with 2 clamping cylinders. Dosing spray device with a nozzle, use of…

Profilma 501E

Fully automatic operation Motor 7,5 KW, S6, 400V / 50 Hz, 2850 R.P.M. For the use of saw blade Ø 550 mm Big cutting range Max cutting height up to 150 mm Max cutting width up to 270 mm 90° cuts Remaining piece from 75 mm Table separation before sawblade retracts powered ball screw spindle…

Profilma 620

High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width…