For sawing aluminum and plastic profiles. Use of Ø350 mm saw blades. Drive 1.5 KW, 400 V, 50 Hz. Manual handling, saw cut from bottom to top. Material cross lay swivel 45 ° -90 ° -45 ° with scale. Pneumatic profile clamping vertical with 2 clamping cylinders. Dosing spray device with a nozzle, use of…
5 axis control, all axes can be moved by motor. The left saw unit firmly on the base, the right saw can be moved by motor. Motorized swiveling to 45 ° – 160 °. Motorized tilt inwards 45 ° – 90 °. Intermediate degree setting possible in all axes. Equipped with an electronic control unit…
Automatic cutting line for PVC and aluminum profiles with 90° and miter cuts Machine control unit through PC and 21“ monitor Maximum raw profile length to be processed with standard version of machine is 1000-7000 mm (longer lengths possible on demand) Shortest cut-off length (at 90°) is 90 mm, shorter pieces possible upon request Shortest…
Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm…
Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm…
Our roller conveyor series RB offers the simplest solution for a manual and stable material supply station for sawing or punching centers. The different versions of our RB roller conveyors can all be heigth adjusted, are available in different widths and lengths and can either be supplied with standard plastic or optional steel rolls. Further…
Punch tools to work aluminium profiles Customized Production Single or Chain tools Holes, notches, bending Tool size up to 1.200 mm Power up to 800 KN
Linear back to front blade feed motor above the table hardened guides, power unit gear motor and ball screw spindle blade feed speed adjustable via potentiometer 0,5 – 12 m/min Table left of blade 120mm width, table right of blade with steel support Infeed conveyor from left side, mouted inside the machine vertical clamp bars…
90° cuts only – cutting of aluminium profiles manual bar infeed from right to left Linear back to front blade feed motor above the table hardened guides, power unit gear motor and ball screw spindle blade feed speed adjustable via potentiometer 0,5 – 35 m/min Entire table with steel support, 200mm width, 60mm height, incl.…
High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width…
For cutting to length and punching aluminum profiles. Fully automatic operation with graphic controls. Drive 7,5 kW, S6, 400 V, 50 Hz, 2850 rpm. For use of saw blades Ø 500 or 550 mm. Siemens S7 control with touch display incl. piece counter incl. reversing device up to a cut-off length max. 1,5 m Re-gripping…
Fully automatic operation with graphic control elements. 7.5 kW drive, 400V, 50 Hz. For HM or PCD saw blades Ø550 mm, max. 2850 rpm. Servo-controlled saw feed, vertically from below. Material feed via servo-controlled ball screw drive. Control Siemens S7 with 7 “touch display. Cutting area 270 x 150 mm (W X H). Remaining piece…
Fully automatic operation Motor 7,5 KW, S6, 400V / 50 Hz, 2850 R.P.M. For the use of saw blade Ø 550 mm Big cutting range Max cutting height up to 150 mm Max cutting width up to 270 mm 90° cuts Remaining piece from 75 mm Table separation before sawblade retracts powered ball screw spindle…
Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade…
The high-performance automatic saw Profilma 250 is designed for cutting aluminum and non-ferrous metals to length with a particularly thin saw blade. Depending on the version, solid carbide circular saw blades Ø 250 mm with 1.6 mm width or Ø 200 mm with 1.2 mm width can be used on this machine. Compared to the…
Precise 45° V-cuts and minimal waste when use as double mitre saw 90° end notching saw for aluminium and PVC profiles 2 saw blades, Ø 550 mm Profile height max. 220 mm, cutting depth 45° = 125 mm, end notch 90° = 180 x 180 mm 2 x 3 KW, 400 V, 50 Hz, 2800…
Precise 45° V-cuts and minimal waste when use as double mitre saw 2 saw blades, Ø 400 mm Profile size max. 95 mm width, 125 mm high 2 x 3 KW, 400 V, 50 Hz, 2850 R.p.m. High cutting speed: 60 m/s Hydro- pneumatic feed infinitely adjustable according to the profiles Material back fence fixed…
Automatic processing line of photo voltaik frames Pressta Eisele offers a fully automatic processing line of photovoltaik frames. Cutting, punching, milling of aluminium frames in 10 seconds cycle time. 2 operator achieve an anual capacity of 500.000 frames. Production cost per piece is approx. 0,24 € each. The line consist of: Horizontal cross loader with…
Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs. Notch variation: rectangle, one sided angular, two sided angular, 3 sided angular. Processing features: The Prisma 650 is able to process standard profiles. Notch dimensions: 210mm horizontal, 262 mm vertical (90°) Profile dimensions: height maximum 320mm, width maximum 280mm 4-axis adjustment…
Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs Manual adjustment of the horizontal blade max. 20mm to the front to cut slots Notch variation: rectangle, one sided angular, two sided angular, three sided angular Notch dimensions: 185mm horizontal, and 210mm vertical at (90°) Profile dimensions: height maximum…
Manual end notching saw to work the ends of aluminium or PVC profiles Use of saw blades Ø 400 mm vertical and horizontal Manual operation with slidable supporting table 2 x 3,0 KW, 400 V, 50 Hz Pneumatic profile clamps horizontal and vertical Material back fence adjustable 30° – 90° read out by scale Vertical…
Horizontal end milling machine with manual feed to machine the ends of aluminium or PVC profiles use of milling disks, cutter blocks or special shaped disks, max. Ø 300 mm Pneumatic feed of cutter disk, hydraulic controlled Motor 2,2 KW, 400 V, 50 Hz Pneumatic material clamping horizontal and vertical Material stop adjustable 20° –…
Horizontal end milling machine with manual feed to machine the ends of aluminium or PVC profiles use of milling disks, cutter blocks or special shaped disks, max. Ø 300 mm Manual cutting operation via hand lever Motor 2,2 KW, 400 V, 50 Hz Pneumatic material clamping horizontal and vertical Material stop adjustable 20° – 90°…
A new crimper for medium and very big sized aluminium profiles 2 universal and adjustable punching units allow a work range of the crimping point from 25 to 60mm from the vertex of the profile Pneumatic crimping via lever system ensures synchronous movement of the punching units Hydropneumatic descending counter support for easier handling of…
A new crimper for big sized aluminium profiles 2 universal and adjustable punching units allow a work range of the crimping point from 25 to 60 mm from the vertex of the profile Pneumatic crimping via lever system ensures synchronous movement of the punching units Hydropneumatic descending counter support for easier handling of the frames…
This crimper is designed for very high and heavy profiles. Up to 5 set of knifes per corner Heavy duty hydraulic crimer 3,0 KW, 400 V, 50 Hz, Crimping power 100 KN V-stop, crimping tools and V-blocks adjustable Descending counter support – hydraulic lock Bedienung über 2 Fußventile Profilles up to 350 mm height, max crimping height 250…
The Frame manufacturing system PRESSTA® – Line is designed for the optimal production flow at the corner cirmping on aluminum frames and related work transitions. The complete system consists of the following modules: Assembly Table: M.T. Corner Crimping Machine: E.V.A. M.T. Assembly Table The table consists of a fixed and a movable bar in rugged welded construction, each…
Our length measuring system PE 50 m offers an affordable, comfortable and easy to use alternative to the purely manual measuring of your profiles. The stop of the length measuring system can quickly be moved into the desired position by the operator and can then be securely fixed in place manually by tilting the fixing…
The length measuring system PE 50 h can be operated with a manually operated wheel. To offer greater stability, the tiltable stop is mounted on a double arm setup. The reading of the measurement happens directly at the stop through a magnet tape and sensor, offering a very high precision level. The carriage with which…
The length measuring system PE 50 e is positioned automatically through a servo motor, after the desired measurements have been entered into the control unit. A modern adjusting positioning control unit ensures that the movable stop stays exactly in position even when under load, The measuring system PE 50 e works with a standard tolerance…
The length measuring system PE 50 d can be positioned manually, and then be fine adjusted with a hand operated wheel. This allows for an easy positioning in the range of a tenth of a millimeter. The measuring tolerance of the system is +/- 0,1 mm/m . The measuring data is collected directly at the…
The high-performance swarf extractor MG9 has an automatic rotary valve and can be operated either continuously, or controlled be an automatic saw. The Aluminum chips fall from the rotary valve into a collection box of the user. Driven by a 4 kW electrical motor, generating an airflow of 4000 m³ Automatic rotary valve that ejects…
The MG 3 chip extractor collects dust and chips in a movable 172-litre container. It has two suction outlets (with nozzles) with a diameter of 100 mm and can be operated either in continuous operation or controlled by the sawing unit. Movable 172 liter collection container Simple locking mechanism for the container through lever system…
4 axis CNC floor-type vertical spindle machining center. 4 axis (X, Y, Z, A) managed by CNC. By means of dedicated tools it’s suitable for working on 5 sides of aluminium, PVC and steel sections. The work pieces are held by means of 4 pneumatic vices on the mobile beam, that can be positioned on…
4 axis CNC floor type vertical spindle machining centre. 4 axis (X, Y, Z, A) managed by CNC. By means of dedicated tools it’s suitable for working on 5 sides of profiles. Suitable for processing on ANY surfaces, generated by the rotation of the spindle axis (side by side at Y axes) on the positions…
5 axis CNC floor type vertical spindle machining center. 5 axis (X, Y, Z, C, A) managed by CNC. Suitable for milling, drilling, tapping and cutting on the 5 sides of aluminum, PVC, steel and light alloys profiles; thanks to the 5 axis interpolation, the machine is able to execute composite cuts. The X or…
Helping hand: Lifter for placing profiles on roller tracks or loading magazines. Pneumatic lifting and feeding of profile bars by conveyor belt Adjustable stops to place the bar to correct position. Function: The bar is pushed against a contact surface – the bar lift up automatically and feed to load. Automatic lowering when position is…
Tooth beld drive – with storages Available for following automatic cutting machines: Profilma 200, 250, 500 E Max. load 8 storages Max. square 50 x 80 mm Max. weight 3 kg / m Profile length 2.100 – 6.500 mm Pneumatic gripper for good feeding of the profiles
Tooth belt drive with profile slide Available for following automatic cutting machines Max. load 750 KG Dimension of stories fix, e.g. max. cutting range of the saw Conveying length 1.850 mm Profile length from 2.700 – 10.000 mm Pneumatic gripper for good feeding of the profiles
Base with hardened guides Hydraulic device; Motor 4,0 kW, 400 V, 50 Hz Operation panel to switch on/off single or multy head mode Foot pedal controlled C-formed stand, working range – ram to back wall 120 mm Daylight 280 mm, quick tool change Distance punch head to punch head min. 245 mm Punching power 60 /…
Chain conveyor for heavy profiles Available for following automatic cutting machines Max. load 5.300 KG Dimension of stories fix, e.g. max. cutting range of the saw Conveying length 1.550 mm Profile length from 500 – 7.000 mm Pneumatic gripper for good feeding of the profiles Buffer storage in front of the loader Infeed of material…
Big cutting range with sawblade / 700mm Max. profile width up to 530mm, profile height up to 270 mm Hydro pneumatic saw blade feed, adjustable radial feed of sawblade – down to up 10 KW motor power R.P.M. of sawblade infinitely adjustable Micro dose spray device Automatic mode or manual mode selectable 2 vertical and…
For aluminum and plastic profiles. Drive power 5.5 kW, 400 V, 50 Hz 3,000 rpm. Hydropneumatic saw feed from below. Manual miter adjustment between 20 ° – 90 ° – 20 ° with electronic digital display. Halftone dots left and right at 22.5 °, 45 ° and 90 °. 2 pieces of vertical and horizontal…
For Aluminium- and PVC-Profiles Motor 7,5 KW, S6, 400 V, 50 Hz Hydro-pneumatic saw blade feed bottom up Use of TCT blades Ø 550 mm Big cutting capacity Capacity up to 190 mm Cutting range up to 350 mm 2 vertical and horizontal clamping devices Dosing spray mist device
For sawing aluminum and plastic profiles. Manual handling, saw cut from bottom to top. Drive 2.2 KW, 400 V, 50 Hz. Use of HM saw blades Ø 350 mm. Manual miter setting 30 ° – 90 ° – 0 ° with scale. Air gun with spiral hose. Manual protective hood (pneumatic option). Pneumatic profile clamping,…
For sawing aluminum and plastic profiles. Use of Ø 350 mm saw blades. Drive 2.2 KW, 400 V, 50 Hz. Saw cut from bottom to top, pneumatic with 2 hand operation. Manual miter setting 30 ° – 90 ° – 0 °. Grid points at 45 ° – 90 ° – 45 °, intermediate mitres…
Suitable for working on steel. The piece that is held by pneumatic vices which are mounted on a rotatable carrier, can be steplessly moved through a pneumatic control between -90 ° and + 90 °. Variable speed of the spindle by means of frequency converter. Pneumatic clamping of the spindle to the selected height. Easy…
Suitable for working on steel and aluminum. Manual feed. Two-speed spindle by changing the position of the belt. Pneumatic copying pen in two stages. Pneumatic clamping of the spindle to the selected height. Large milling area despite a compact design. Easy tool change through self-releasing systems. Copy work in a ratio of 1: 1. Milling…
A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of…
Base 3000 mm, with hardened guides in x-direction, 3.000 – 8.000 mm Electric device – operation via 2-hand safety control, setting mode to adjust drilling depth – key switch Drilling units with stand and linear guides in X-direction, shafts for manual adjustment of drilling height, working range 125 mm (drill to back wall), Positioning in…
Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 90 KN Stroke = 40 mm 25 Double strokes / min. Max. daylight = 250 mm Working range: ram to back wall = 130 mm Working range with turn table: ram to back wall = 90 mm Working height 950…
Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 50 KN Stroke = 37 mm Max. daylight = 200 mm Working range: ram to back wall = 110 mm Swiveling table to use tools to manufacture holes for sash bars
Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 400 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm Working range: ram to back wall = 200 mm Table dimension: 600 x 400 mm Quick change tool system
Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 200 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm Working range: ram to back wall = 200 mm Table dimension: 600 x 400 mm Quick change tool system
Quick change tool system Hydraulic operated Foot valve operated Max. power at 200 bar = 160 KN Stroke = max. 80 mm adjustable via limiter switch 14 Double strokes / min. Max. daylight = 250 mm Working range: ram to back wall = 130 mm Working range with turn table: ram to back wall =…
Cutting line with loading magazine and profile disposal for small parts and take-off stations for cut-off lengths up to 7,200 mm or 2 times up to 3,000 mm. Technical data: Sawing line for cut-off lengths from 10 to 7200mm sawing width min. 10mm up to max. 470mm sawing height min. 10mm up to max. 200mm…
Available for following automatic cutting machines: Profilma 250, 500 E, 510 E, 600 R Top loading by crane or fork lift Max. bundle Ø 650 mm Max. load 4.000 kg Bar length 3.000 – 6.200 mm Pneumatic gripper for good feeding of the profiles
0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 600 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63…