For sawing aluminum and plastic profiles. Use of Ø350 mm saw blades. Drive 1.5 KW, 400 V, 50 Hz. Manual handling, saw cut from bottom to top. Material cross lay swivel 45 ° -90 ° -45 ° with scale. Pneumatic profile clamping vertical with 2 clamping cylinders. Dosing spray device with a nozzle, use of…
For sawing aluminum and plastic profiles. Use of Ø 350 mm saw blades. Drive 2.2 KW, 400 V, 50 Hz. Saw cut from bottom to top, pneumatic with 2 hand operation. Manual miter setting 30 ° – 90 ° – 0 °. Grid points at 45 ° – 90 ° – 45 °, intermediate mitres…
For sawing aluminum and plastic profiles. Manual handling, saw cut from bottom to top. Drive 2.2 KW, 400 V, 50 Hz. Use of HM saw blades Ø 350 mm. Manual miter setting 30 ° – 90 ° – 0 ° with scale. Air gun with spiral hose. Manual protective hood (pneumatic option). Pneumatic profile clamping,…
Linear back to front blade feed motor above the table hardened guides, power unit gear motor and ball screw spindle blade feed speed adjustable via potentiometer 0,5 – 12 m/min Table left of blade 120mm width, table right of blade with steel support Infeed conveyor from left side, mouted inside the machine vertical clamp bars…
For Aluminium- and PVC-Profiles Motor 7,5 KW, S6, 400 V, 50 Hz Hydro-pneumatic saw blade feed bottom up Use of TCT blades Ø 550 mm Big cutting capacity Capacity up to 190 mm Cutting range up to 350 mm 2 vertical and horizontal clamping devices Dosing spray mist device
For aluminum and plastic profiles. Drive power 5.5 kW, 400 V, 50 Hz 3,000 rpm. Hydropneumatic saw feed from below. Manual miter adjustment between 20 ° – 90 ° – 20 ° with electronic digital display. Halftone dots left and right at 22.5 °, 45 ° and 90 °. 2 pieces of vertical and horizontal…
Big cutting range with sawblade / 700mm Max. profile width up to 530mm, profile height up to 270 mm Hydro pneumatic saw blade feed, adjustable radial feed of sawblade – down to up 10 KW motor power R.P.M. of sawblade infinitely adjustable Micro dose spray device Automatic mode or manual mode selectable 2 vertical and…
90° cuts only – cutting of aluminium profiles manual bar infeed from right to left Linear back to front blade feed motor above the table hardened guides, power unit gear motor and ball screw spindle blade feed speed adjustable via potentiometer 0,5 – 35 m/min Entire table with steel support, 200mm width, 60mm height, incl.…
