• Automatic cutting line for PVC and aluminum profiles with 90° and miter cuts
  
• Machine control unit through PC and 21“ monitor
  
• Maximum raw profile length to be processed with standard version of machine is 1000-7000 mm (longer lengths possible on demand)
  
• Shortest cut-off length (at 90°) is 90 mm, shorter pieces possible upon request
  
• Shortest inside dimension for cut-off parts when cut with a miter is 160 mm (45°) and 390 mm (22.5°)
  
• Longest cut-off part (outside dimensione) is 4000 mm (longer upon request)
  
• Sawing angle freely adjustable through the control unit from 22,5° to 157,5°
  
• Maximum workable profile dimension: Maximal 350 mm height, maximal 200 mm width, as shown in the cutting diagram

• Horizontal loading magazine with 6 tooth belt drives 210mm chamber width, maximum loading capacity: 75 kg per raw profile bar
  
• The feeding of the raw material bars into the saw is done through a material pusher with a driving speed of 180 m/min and a positioning precision of +/- 0,15 mm per meter
  
• The gripper of the material pusher can adjust in Y and X axis automatically based on the profile geometry
  
• Pneumatic lifting rolls lift the profile slightly while it is pushed into the saw, so that it does not scrape over te saw table surface
  
• Cutting station with Ø 600mm saw blade und 5.5KW saw motor (optional upgrade to 9.2 KW possible)
  
• Variable tiltable through servor motor from 22,5 – 157,5°
  
• Hydro-pneumatic saw feeder
  
• Minimal quantity kucricator with monitored 2 liter tank and one nozzle
  
• The complete saw unit is housed in a closed cabin internal lights over the saw
  2 extraction ports of 100 mm diameter

• Material outfeed with automatic trim-cut and rest-piece separator. Trim-cuts and rest-pieces are pneumatically transported to the rear of the machine and fall into a
  customers box (faII height: 1000 mm)
  
• Good-parts are taken by a motorized gripper and deposited onto a 4 m long roller conveyor, from where they are pushed across onto the belt feeders on the outfeed table
  
• For smalI parts there is a 250mm wide felt belt on the beginning of the outfeed table
  
• A blower bar with three shaped nozzled blows compressed air at the parts to remove the majority of excess chips especially from hollow parts (no warranty that all chips are removed)
• The outfeed table can accommdate parts up to 4000 mm length
• The parts are transported towards the front of the outfeed table over a distance of 2000 mm, where the machine operator can then manually take them off

Prospekt

Video